|
Hot Cleans, Deodorise, Stain Protects and Heat Dries Your Carpet
What is Dry Fusion?
Dry Fusion has been developed for todays
carpets. There have been big changes in the construction of
carpet and carpet fabrics over the last few years, most noteably
commercial and domestic carpet has become shorter. Because
of the denser packed pile, airflow is reduced and the carpet
is left wetter. Add to this increased soilage and detergent
is left behind. These changes have contributed to extraction
cleaning methods leaving the carpet wetter for longer, with
more residual dirt left behind due to poor airflow. Dry Fusion
has been designed to maximise cleaning performance on these
new carpets. It works because it doesn't rely on airflow to
clean or to dry.
Dry Fusion is the only carpet cleaning system
that hot cleans, deodourises, stain protects then heat dries
every type of carpet. It's all in the same process, and because
it is patented, nobody else can use this amazing system of
cleaning. By taking all the best features of hot water extraction
(hot solution, "Shot of Steam"), the best features
of dry cleaning (low moisture, mechanical agitation) and combining
them together with the patented hot cleaning pad system that
constantly heats the fibres as they are being cleaned - you
have some of the most outstanding results ever seen. Two unique
mechanisms work to keep Dry Fusion cleaned carpet virtually
stain free to maintain that just cleaned look longer. A Fluorocarbon
Resin (a Dupont Specialty) places an invisible protective
shield over every fibre during the cleaning process.
It helps
prevent dry grit, dust as well as spills lodging within the
carpet. Even walked in mud and oily spills have difficulty
seeping in. Because the fibre is effectively "non stick"
when you DRY FUSION clean, vacuuming removes more soil, plus
the vacuum cleaner is easier to push.
Blocking Stains
This unique additive helps block dye sites in the fibre that
normally allow food spills and beverages becoming ugly stains.
When re-cleaned with Dry Fusion - using the "shot of
steam" most stains are removed without spotting or special
effort.
All Fibre Safety
Rotary dry cleaning methods use high pH presprays to remove
oily soils and protein stains. Sometimes this is followed
by an acid rinse to neutralise. Most carpet mills, especially
using wool or stain treated nylon reject any exposure to prespray
of pH 10 to 12, even if only on the carpet for 5 minutes.
Damage can take place in this critical exposure stage. Dry
Fusion uses novel technology that removes the heaviest soils
from the fibre at pH 7.2. A neutral pH is approved by all
carpet fibre manufacturers and carpet mills.
Activator - The Chemical
Our research into the area of fluoro surfactants, fluro stain
protectors and polymer stain blocking resins has enabled us
to give you a system that removes more stains than any other
dry or wet method as well as to increase stain and dirt repellancy.
Environmentally Aware
All emulsifiers and greasy soil solublisers are highly biodegradable
and degrade rapidly. The natural orange and vanilla extracts
used as odour neutralisers have been selected for their non-irritant
qualities for those with sensitive noses and bronchial problems.
Bactoshield and Antimicrobial
For healthcare, sporting facilities, day care and at home
you apply Bactoshield in the same manner as Activator, except
that it has a more powerful cleaning action to deal with the
type of stains found in healthcare and child care centres.
Oily linaments, medicines, crayons and make-up; even traffic
lane yellowing on carpet tiles and olefin fibre is removed
more easily with BACTOSHIELD.
Places a 'Triclosan' Shield on Each
Fibre
Imagine as you clean, a water-proof, antimicrobial finish
is being permanently bonded and locked in place by the fluorocarbon
stain protective coating. Previously, the only long term treatment
for carpets was when an antimicrobial was added to the fibre
during manufacture. There is no proven product on the market
today that can provide cleaning and be equal in antimicrobial
effectiveness.
Bactoshield is Safe
Triclosan has been used in toothpaste and medical products
for years and is non-toxic. It helps prevent the growth of
moulds, fungi and tinea as well as the problem bacteria like
E-Coli and Staph Aureus. Bactoshield provides the risk management
that your customers need for public liability.
Urine and Body Odours
Healthcare and sporting facilities are notorious for resistant
odours like urine, vomit and body odour. Bactoshield removes
ammonia and even pet smells. If it works in the commercial
sector, imagine how good it is in the home.
|